Guide How To Flash Stock Firmware On Samsung Galaxy GALAXY S 3 GT-I9301I Using Odin V3.10.6.
Flash Stock Firmware On Samsung Galaxy GALAXY S 3 GT-I9301I. See you on android guide at We, now, I will share a little guide how to flash a stock ROM on Samsung Galaxy GALAXY S 3 GT-I9301I using Odin V3.10.6. software. Samsung GALAXY S 3 GT-I9301I is the smartphone with 4,8 Inchi wide LCD, work on Android OS, v4.4.4 (KitKat) - GT-I9301I, with Qualcomm MSM8228 Snapdragon 400 Chipset, supported with Quad-core 1.4 GHz Cortex-A7 CPU and Adreno 305 GPU, combined with 1,5 GB of RAM and 8 MP of Main camera and 1,9 MP on secondary camera.
Flashing process in android Smartphone is like reinstall process on windows computer PC, with flash your Samsung Galaxy GALAXY S 3 GT-I9301I android device you can unbrick, downgrade, manually upgrade (instead of updating via OTA or Samsung Smart Switch), or restore Samsungs stock firmware instead of custom ROM. I make this guide just for you as user all Samsung galaxy GALAXY S 3 GT-I9301I variant.
You need to read this guide carefully, so you can get the best result flashing on your Samsung Galaxy GALAXY S 3 GT-I9301I. Cause you need to download necessary file, you must ensure that you have good internet connection in your computer device, this guide using a windows computer.
Initial Step To Flash Samsung Galaxy GALAXY S 3 GT-I9301I
Now, we have reached on beginning guide, so you must to do initial step to ensure everything run smoothly.
- Make sure your Samsung Galaxy GALAXY S 3 GT-I9301I battery is not in a low battery state, a minimum of 80%. If the battery runs out in the middle of the Root, it can lead to failure
- Always perform backup your important data before flashing process, Cause this process will delete or erase the data in memory.
- Make sure you have installed a Latest of Driver Samsung that support with your Smartphone, If you dont have, please download here
- Original USB cable driver for your Samsung Galaxy GALAXY S 3 GT-I9301I
- Download Samsung Smart Switch, Here
- Download Odin V3.10.6., Here
- Download Official firmware file for the model number of your device, download it from - SamMobile, or you can visit the other site, Here
Main Guide To Flash Samsung Galaxy GALAXY S 3 GT-I9301I
- You must download all necessary file.(Samsung USB driver or Smart Switch and Odin)
- Then you must install all driver or samsung smart switch to your computer or PC.
- Extraxt Odin V3.10.6. file on the destination folder.
- To download Samsung firmware you must visit this link, you can download specific firmware file for your device model number.you must Log In with your registered account on this website.
sammobile website Log In - On the row menu at the top of page, you can select firmware.
sammobile website Samsung Galaxy GALAXY S 3 GT-I9301I - Then you must enter in search bar with your phone model number.
sammobile website Samsung Galaxy GALAXY S 3 GT-I9301I - Then select your country.
sammobile website Samsung Galaxy GALAXY S 3 GT-I9301I - Then you click on appear link.
- Select regular download.
sammobile website Samsung Galaxy GALAXY S 3 GT-I9301I< /td> - And Download button again. Approximately file size is 1,6 GB
- Wait untill your file finish downloaded, after that you must extract all firmware file on specific folder on your computer.
- This is your file.
Stock Firmware Samsung Galaxy GALAXY S 3 GT-I9301I - Switch Off your Samsung Galaxy GALAXY S 3 GT-I9301I to start flashing process.
- Then, you must run Odin v3.10.6 by right click on Odin.exe and select Run as Administrator.
Flash Stock Firmware On Samsung Galaxy GALAXY S 3 GT-I9301I - When program is running, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware file.
Flash Stock Fi rmware On Samsung Galaxy GALAXY S 3 GT-I9301I - Now your firmware file has been inserted in Odin3
Flash Stock Firmware On Samsung Galaxy GALAXY S 3 GT-I9301I - Then, Enter download mode your Samsung Galaxy GALA XY S 3 GT-I9301I by pressing and hold Volume Down Button + Home Button + Power Button. Hold and press all button untill your phone vibrate and LCD show menu.
Download Mode Samsung Galaxy GALAXY S 3 GT-I9301I - And you will see picture like this on your LCD screen.
On this mode, now you must connect your Samsung Galaxy GALAXY S 3 GT-I9301I to your PC / laptop using a USB cable.
Root Samsung Galaxy GALAXY S 3 GT-I9301I. - A fter your phone connected, you will see a message appear that show your device added and there is info on the ID: COM at top left corner. Keep in mind for this COM vary depending on the PC / Laptop. Just Ignore all, in this picture you will see that your device is detected on (COM 5)
E nter download mode samsung galaxy GALAXY S 3 GT-I9301I - Make sure re-partition is NOT ticked
- When everything already you can click Start Button. at the bottom left corner
- Just wait for the process to run about 2-5 minutes, and make sure there is no interference in this process.
- When complete it will display a notification PASS and your smartphoneSamsung Galaxy GALAXY S 3 GT-I9301I will automatically restart.
- Wait your device to boot up, it will take a while.
- When your Samsung Galaxy GALAXY S 3 GT-I9301I is ready to use, you can check your firmware update version by dial *#1234# on dial pad.
dial pad samsung galaxy GALAXY S 3 GT-I9301I - And you will see your new firmware version.
firmware version samsung galaxy GALAXY S 3 GT-I9301I - Finish.
Warning.
Never disconnect the USB cable while flashing process is running.
Install Samsung Mobile Driver or Samsung Smart Switch if you dont see a sign in Odin.
Flash your Samsung Galaxy GALAXY S 3 GT-I9301I device at your own risk.
Flashing firmwares which contains more than one *.tar.md5 file will wipe all data on internal storage. Flashing official/stock firmware wont increase the binary flash no r KNOX WARRANTY VOID counter and wont cancel the Samsung Galaxy GALAXY S 3 GT-I9301I devices warranty.
Tidak ada komentar:
Posting Komentar